The K1 Stock from Grunig & Elmiger is the result of over three years of development and twenty years of experience in stock construction, with input from some of the leading three positions shooters in the world.
The K1 provides a far greater range of options and adjustments than any previous stocks. The main features are:
- Three different options for the width of the fore-end. 48mm is the same width as the RS and XRS stocks.
- The underside of the fore-end is textured, providing a more secure contact between the stock and the shooter's glove.
- Three different options for the offset of the rear part of the stock compared to the centre of the bore. 7.0mm is the same as the RS and XRS stocks.
- The new 3D grip comes in four different sizes, and provides for a far greater degree of adjusment than previous models.
- Quick adjustment levers for the butt length and cheekpiece height.
- The Trigger Guard can be moved back and forward.
- An much smaller, adjustable trigger guard is available as an optional extra.
- Compatible with the Equaliser Stock Weight System.
The stock is designed for use with square bottomed actions such as the Anschutz 2013, G&E R3 Racer, G&E FT300 & Bleiker Challenger. It can however be used with the addition of the Anschutz Round Action Adaptor Plate allowing Anschutz Match 54 actions such as the 1913 to be fitted.
The 'Equaliser' - an optional set of fore-end weight rods - fits inside the fore-end of the stock, and can be adjusted fore/aft to optimise the balance of the rifle in each position.