Centra Block Club [199159xx]

£97.00

Quantity

An adjustable set of sight blocks that provide both vertical and horizontal adjustment.

The base height of 10mm is vertically adjustable to 22mm in 4mm in 4mm increments, and there is a horizontal adjustment of 4mm available to either side.

Delivery costs depend on the size and value of each shipment, and costs for mainland GB customers will be calculated and displayed as you add items to your basket.

For UK customers, items in stock will normally be delivered in 1-3 working days. Postcode exceptions may apply for Channel Islands, Northern Ireland, Isle of Man and other areas.

Shipments to other countries will always be sent using a tracked service.

Please note that when Donald is travelling in his capacity as a Coach with British Shooting, delivery times are likely to be a little slower.

From Malcolm Catto from Aberdeenshire
(25th May, 2022):

Does it come with all the blocks for the different heights

Yes it does.

Your Name:

Your E-Mail Address:

Your Location:

Your Question:

From Neil from Derbyshire
(1st August, 2022)

First, I should say that Edinkillie were really helpful and answered by questions quickly - even though they were in Korea at the time! I purchased the Anschutz fit (as recommended by The Edinkillie Team) to fix a vertical alignment issue with my cheap Air Arms sights mounted to my (non-sporting) Weihrauch HW110T Laminate rifle. The rail widths I was attempting to mount to were 11 and 11.4mm and these raisers fitted a treat. As for the raisers themselves - they are very well made and supplied with all the tools and extra spacers needed. Really easy to use and fit. The multiple fitting points allow adjustment front to back (on the larger rear block) and side-to-side on both. I used a cheap (and not very good) AirArms diopter sight set. I'm 100% sure that any set of sights from Edinkillie would be much better. I'll be upgrading my sights as soon as I can. For anyone else mad enough to try an fit diopter sights to their HW110 - honestly it's great fun and a real challenge... I fitted a barrel adapter (16mm) at the front and adapted the picatinny rail at the rear to an 11mm dovetail rail. These two adapters were purchased from Ant Supplies. I needed the raisers from Edinkillie because the front sight is 4mm too low and both front and rear really needed to be raised because the HW110 is intended for scope use, meaning the 'open sights' are a bit too low without them. Long picatinny to dovetail https://www.ant-supplies.uk/rails-and-adapters/weaver-to-dovetail-adapters.html Barrel adapter (16mm) fitted behind the silencer, I choose the 'standard' one https://www.ant-supplies.uk/rail-base-mounts/diopter-sight-muzzle-adapter-bases.html

From Peter Copeland from Northamptonshire
(27th February, 2023)

Great service prompt and we’ll packed the riser fitted correctly and with the ability to be adjusted I was able to find a good eye level and comfortably position I would recommend this product

From Mike from Sussex
(29th January, 2024)

I only needed the foresight raiser so was pleased when I found Edinkillie sold the front and rear parts separately.

Your Name:

Your E-Mail Address:

Your Location:

Your Rating:

Comments: